514

logo
controllerbox

Telephone: 01329 287841
Email: info@cootevibratory.co.uk

  • Accurate control of electro magnetic feeders
  • Easy mounting and installation
  • Inbuilt electronic stabilisation
  • Compact durable casing
  • Full or half wave operation
  • Internal cabinet mounting

Operation
The 514 control module is an electronic device offering accurate control of electro magnetic feeders. The mains voltage supply is always fluctuating, typically between -10% and +6%. As feed rates are heavily dependant on applied voltage this will have a detrimental effect on flow.

Our controllers feature inbuilt stabilising electronics, that constantly monitors the mains voltage and adjusts the output level accordingly to maintain the feed rate as close as possible to the desired settings.

Installation
Mounting inside of cabinet housing.

Modules can be din rail mounted or screw fixed.

Inputs provided for on/off switching.

No additional cooling required.

Connections are made with screw terminals

10k Ohms potentiometer required for setting control.

Also for P.L.C. 0  - 10V or 0 (4)  - 20 ma.

Specifications
The module is housed in a robust case with screw terminals.

Trimmers are provided for minimum and maximum vibration.

Full and half wave selectable output.

User serviceable fuse module for protection.

Internal RFI suppression

Power on LED

C.E. marked.

Technical Details

Input                                                   230V 50/60 HZ (110Volts available)

Output                                                0.2 - 6 Amp.

Output Frequency                           Full (100 HZ) Half (50 HZ)

Set point                                             Potentiometer, 10k Ohms

Inhibit/Enable Input                         12 - 24 Volts dc or Volts free contacts

Soft start                                             Fixed 0.1 secs

Protection Rating                              IP00 -VBG 4

Ambient temperature                       0º  -  +45º Centigrade

Dimensions                                        80mm Long    X  102mm Wide    X    114mm High

REMEMBER
Advice is Free  - Please ask if uncertain of suitability for intended use.

Coote Vibratory Ltd maintain a policy of continued development and therefore reserve the right to introduce changes in design and construction without prior notice.