

Telephone: 01329 287841
Email: info@cootevibratory.co.uk
- Accurate control of electro magnetic feeders
- Easy mounting and installation
- Inbuilt electronic stabilisation
- Compact durable casing
- Full or half wave operation
- Internal cabinet mounting
Operation
The 506 control module is an electronic device offering accurate control of electro magnetic feeders. The mains voltage supply is always fluctuating, typically between -10% and +6%. As feed rates are heavily dependant on applied voltage this will have a detrimental effect on flow.
Our controllers feature inbuilt stabilising electronics that constantly monitors the mains voltage and adjusts the output level accordingly to maintain the feed rate as close as possible to the desired settings..
Installation
Mounting inside of cabinet housing.
Modules can be din rail mounted or screw fixed.
Inputs provided for on/off switching.
No additional cooling required.
Connections are made with screw terminals.
10k Ohms potentiometer required for setting control.
Specifications
The module is housed in a robust metal case with screw terminals.
Trimmers are provided for minimum and maximum vibration.
Full and half wave selectable output.
User serviceable fuse module for protection.
Internal RFI suppression.
C.E. marked.
Technical Details
Input 230 Volt 50/60 HZ (110 Volt available)
Output 0.1 - 2 Amp.
Output Frequency Full (100 HZ) Half (50 HZ)
Set point Potentiometer, 10k Ohms
Inhibit/Enable Input 12 - 24 Volts dc or Volts free contacts
Soft start Fixed 0.1 secs
Protection Rating IP00 -VBG 4
Ambient temperature 0º - +45º Centigrade
Dimensions 74mm Long X 45mm Wide X 125mm High
REMEMBER
Advice is Free - Please ask if uncertain of suitability for intended use.
Coote Vibratory Ltd maintain a policy of continued development and therefore reserve the right to introduce changes in design and construction without prior notice.